Well its taken me plenty of time to get my gas tank clean. Its now ready for the Cad plating. This was a very involved cleaning because of the nearly 3/8 inch of crud covering the bottom of the tank. It was so bad the suction line was completeley plugged up. I will be removing the copper line from the top cover of the tank and silver soldier in a new piece. Was lucky to find a piece of heavy wall copper tube in my shop.Sometimes we get lucky I guess. Notice how the tank baffles are made into the tank. Seems they are a copper brad that has been soldiered in place.
You do realize that RTV is not for use in gas applications
CORDiallyMike.
You do realize that RTV is not for use in gas applications
CORDiallyMike.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.






