Today I got my starter back from the rebuilder. I purchased all the bushings, brushes and other parts from Stan some time back. Only reason I did not rebuild it myself is I also purchased the high torque case winding coils. Getting them out was easy but the work needed to soldier the new leads into the case was a little beyond my skill level. So it is in the paint shop hanging with a few coats of black on it. May leave it or add a few more coats tomorrow. It wont be a Pebble Beach finish but it will be close. Pics coming later.
M
· Sep 18, 2016
Think bare metal to bare metal to engine block regarding case - most problems I see with hard starting restored cars is too much paint on electrical parts and not enough care taken with grounding. Curt Schulze also told me of the benefits of new rivets (I have been using blind head bolts that look like rivets) for the brush holder mounts - just did my first Auburn started and while not yet tested I am looking forward to seeing if any improvement.
M
· Sep 18, 2016
I like the look of the black you have chosen - very authentic
M
· Sep 18, 2016
Heres some pics of the finished starter. Thanks for the nice comments of my color choice. It's a gloss black. Nothing more than that. And for the great tips about having a bare metal to metal contact between the case and the bellhousing. This was my intent all along but its nice to see others with the same idea.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.