Has anyone figured out what the characters on the RH side of the tag designate ?
 
 
I have wondered about these too. I will get a close up pic and post it here later.
Maybe after the distributor was quality-inspected on the line' date=' it was stamped by the person doing the inspection....[/quote'] 
 
This is a good possibility. Sadly it looks like someone should have done a quality inspection of the inspection stamp. It appears to be a lazy H with an A stamped half way under the stamp strip. But no matter. It is what it was. I just finished painting it black after masking off the stamps strips. Then sanded down so the lettering stands out as was original. The Autolite name tag had some "distress on it from years of bumping round a repair or shop table. It has a vintage look with some nicks here and there.
As seen in some of the first set of pics. This distributor was rebuilt and painted primer red. So there was no need for bushing or shaft repairs. Just free up and paint. Then reassembly and grease the bushing and moving weights.
Today I reassembled the dist. I used some assembly grease I've had for many years just to allow the wrmed up engine oil time to reach the bushings. I tried to show the most important areas of assembly but if anyone has questions I can explain what I found. I receiently found a new dist name tag but would need the letter and number punches. Still time for that if I wanted to restore to better than it left the line. Some refer to that type or restoration as.... Over restored. Still not sure if I want that type of restoration.
I found some before pics of my distributor. I don't think my condenser is the correct one for this points set becausae the mount was bent to fit this plate. Can anyone tell me what the correct part number is for a condenser? I have installed a new set of points and have a new condenser but would like to know the correct part numbers bor both. thanks and enjoy the pics.
Thanks for posting these excellent pictures.
According to Auto-Lite documentation, the original part number for the condenser is IG-2671 and the part number for the points is IGP-3028A.
 
Mark
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.








