For next time--an old mechanic's trick--drill out the broken bolt with a left-hand drill. As often as not, the stub will come loose and come out with the drill. Buy them cheap at Harbor Freight, or buy good ones at McMaster-Carr.
 
--Tom
M
· Dec 29, 2015
You might want to determine why it broke if possible. Misalignment etc. Don't want it to happened again.
Cordially Mike
M
· Dec 29, 2015
Thanks Tom for the advice on the left hand drill bits. This thread was so dirty that the drill bits would not have unscrewed the broken bolt. It took plenty of torque to remove the bolt. Mike as for reasons why this broke my best guess is the threads were not cleaned out or the bolt was dirty with grime or road dirt so it broke when it was installed. Or some mechanic used way too much torque installing it. The only threads not cleaned yet on this restoration at the engine block coolant drains and the engine mounting points.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.