Hi Gary: in my experience, the "w" bolts or the plain bolts are the most common. Either would have no trouble going through the judging process. What will lose points are any obvious modern bolts. Also, no Phillips head screws. I believe the Phillips was invented in 1936, but none were used on the Cord. Yes, large flat washers were used to help hold fenders etc. and some were cut to fit as you have found.
Tim.
Hi Curt, How do you know they were grade 9 bolts. I am aware of grade 8 but have not heard of grade 9?
Cordially Mike
Several points of interest.
 
I have heard the "W' stands for Williamsport - perhaps someone can research ?
 
I would assume the "W" also is allays a hardened bolt via their location on the engine (ex. head bolts and accessories).
 
I am working on a friends 1939 LaSalle and there are several "W' bolts under the hood (mostly in relation to the hood mounting and related shrouding) and my 1941 Cadillac also had "W" bolts in similar places.
 
Curt does beautiful bolts via making/reproducing head markings and correct black Parkerized finishes for most (if not all) "N" "W" and "30" marked hardware to allow authentic restorations of 851 - 1935 and 852 - 1936 Auburns (and 850 - 1934 Cars also share). And, several top award winning cars now sport proper hardware (I would say perhaps 8 Boattails and a handful of Phaetons & Cabriolets - and impressive to see these cars).
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
