The same oil services both units. As to the oil leaking out. Don't think I've ever seen a Cord that didn't leak a little. Josh Malks always commented on this as his leaked. It shouldn't be much, if it is you should fix it. Guess cleaning the shims and using lots of sealer between them is the way to go. I just put a drip pan under mine and live with it. If I have to work on the transmission I will install a sealed bearing on the bottom shaft like I did on the top shaft. The bearing number is 5305 CZZG. Pull the seal disc from the side of the bearing that doesn't have the large ring on it. Place it on the shaft so the side that doesn't have the seal faces the inside of the transmission. The bearing will get it's oil from the oil in the case. Don't know if this will cure the leak but it's worth a try? If you do it let me know how it worked out.
 
Henry Portz put me on to using this bearing in this manner for the top front bearing. He feels that it keeps the oil pressure up as the oil can't go through the bearing into the case like it can with the original bearing which doesn't have seals.
Did you mean to say a sealed bearing instead of a shielded bearing?
Dave
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
