Well the 4th gear synco shaft came out easily but.. The 2nd gear cyncro that is stuck. So far I have removed 2 round pins from the hole on top of the trans. They are about 1/2 inch diameter and round on one end and slightly pointed on the other. No springs have come out yet. Also I found no syncro springs or balls in the second third syncro. So far I have found no gear teeth damage. Thats 2nd 3rd gear syncro lever ty wired set screw is a ruff one to reach. It was so easy to unscrew too. It was broken in two pieces too. In all my years of wrenching bolts or nuts loose I have NEVER seen a set screw break completely but follow the top piece up to the top of the parent threads. I just used a thin blade screwdriver to work the broken piece around till it came out. I have been told many times working on a Cord has plenty of "things" that are different from other Cords or other cars and boy have I been finding them. My repair journal is getting really full of little surprises like this. Pis to come later.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.