Well I tried to post more pump pics but I get an error message. I even tried posting pics I already posted but same error message... Very discouraging....
M
· Oct 20, 2015
Have been reading in the trans book our clug sells by Ayers. Very nice book too. but I'm not seeing that I can machine out my pump to accept the 3/8 inch thick gears. My pump body does not appear thick enough to handle this. My gears now are 5/16 inch thick. I was reading something that Henry Portz has done by adding the 3/8 gears with a special spacer that goes between the pump body and the cover. Not really sure I want to make that modification or not. I also do not know why the bottom side under my driven gear has the three drilled holes and the deep recess where the drive shaft comes thru the body.
M
· Oct 20, 2015
Henry has built up a number of pumps to take 3/8" gears. He doesn't list it on his web site but I know he has done them. You could check his web site portzcordz.com.
M
· Oct 26, 2015
another test picture maybe. Well that worked ok from internet explorer ok. As you can see this is a very well worn gear. Its the same tooth count as what I found in the pump and pictured already. I wonder how much oil this was pushing thru the trans???
M
· Oct 27, 2015
That pump has been pushing a lot more than oil through the trans!!!
Cordially Mike
M
· Oct 27, 2015
Yes Mike, these gears were pushing some metal. They were not the gears I found in the pump when I removed it from the trans years ago. Really don't know why they stayed in the parts that came with the car in 1961. So far I just don't see any gear damage but will find out tomorrow hopefully. I can't figure out why the 2nd 3rd gear shift rod is not coming out of the trans case. It wont move in or out.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.