On an 850, 851 852 Auburn they used a piece of fender welt between the body and the accessory trunk, On the interior they slit open a piece of about 1 inch rubber tubing and slip it over the two sheet metal edges (it kept all the sharp edges from damaging anything in the trunk and it also carried any water leakage to the trunk floor - which unfortunately they made no accommodation to drain out water from the trunk floor). I have always been fortunate to have had really solid cars, but my guess is the installation system killed plenty of cars not well cared for. The rubber tubing is secured by about 8 or so sheet metal "C" clips.