Gary; If you use one spring per rivet ( 3 total ) they will work just
fine, and you'll reduce the risk of breaking the lens.
George.
M
· Jun 14, 2015
Gary - Would you be able to post a picture of the fitting?
Thanks,
Albert
M
· Jun 14, 2015
Here are some pics. You can see there are 2 springs on each area. The rivets are brass too. Also note there is a top and bottom by the finger pointing to a drain hole.
M
· Jun 15, 2015
While you are at it I suggest, for safety, that you paint the inside of the housings white and install bright bulbs. I use 14/50 watt incandescent bulbs I get from Bob Drake, Grants Pass, Oregon.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.