Hi Gary,
 
I suspect that what happened might have been that 1) one of the front spring bolts broke--the originals were known to do this. or 2) the front wheel cracked and went off on its own merry way unexpectedly, or 3) the hub broke--rare but not unknown.
 
When re-assembling the front spring, use replacement better-design bolts available from Stan or Henry Portz. You can also get spring retainers from Stan if your car doesn't have them.
 
Heavy-duty wheels are available, but not inexpensive. I don't know how to tell by observation a standard-duty rim from a heavy-duty rim.
 
--Tom
Thanks For the information Tom. I do plan on upgrading the spring bolts to the stronger types. Not sure who I will purchase from yet. My car does have the spring safety brackets and I believe they were factory fitted. Not after installed because of my serial number.
I'm still not learning if I can just replace the 2 longest leafs instead of all 14 leafs. I did some research and found several leaf spring manufactures within 25 to 100 miles. I may take the complete spring to them and see what they say. I realize new material and a better understanding about how things are made can really change the way the car looks and rides with an updated desinged spring up front. For that matter even replacing the rear springs can improve the handling and ride. Mine are still under the car and the covers are in great shape. Not looking forwards to opening that can of worms. I'm betting the grease in there is going to me a mess of hardened tar.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
