Hi,
 
I swear, nothing is normal in a Cord block. I recall my dad had to make a custom-configured ring compressor to get the .020"-over pistons back into the block oh-so many years ago. (I think that ring compressor is still somewhere among the boxes of parts. NOTHING Cord-related was thrown out...)
 
He also built a wood cradle on steel casters to hold the block and transmission assembly. I guess either a standard engine stand was more of an expense than he was willing to incur, or he didn't want to explain the cost to my mother, or the block just would not fit to a regular stand.
 
As for the pistons being in the cylinders for decades with the spark plug holes open, the dire prediction was expressed to me many times that the rings likely had corroded to the cylinder walls and that the cylinders would be a rusty mess. So, I checked with a borescope, and the interior metals are as shiny and new-looking as when my father assembled the engine in 1955 or so. I also turned the cranks a few teeth with a pry-screwdriver, and it turned smoothly and easily. The assembly lube he used was Lubriplate #105 (for some reason I recall the black and silver label on the can), and it is the slickest, gloppiest, and apparently rust-protection-est stuff ever.
 
Good luck with your engine. Let me know if you need to borrow the ring compressor for re-assembly.
 
--Tom
 
PS: I just found out last night through a family history that my mother was actually happy to find that my father had bought the distressed Cord. Apparently the choice was getting either the Cord or a fire truck!
 
He chose wisely...
 
--Tom
Greetings Fellow ACD Club members,
It is exchanges like this between Gary Parsons (CA) aka 1748S and the always entertaining Tom Parkinson of Michigan that makes this club of ours so special. The commonality of these unique marque automotive restoration experiences and the satisfaction derived from it all are what makes the
ACD Club so unique and enjoyable. Put your prizes away for a winter's nap and dream about the coming adventures of next spring. Richards in Iowa.
Hi,
 
Thank you Jonathan! If it weren't fun AND educational, I would not be in this hobby!
 
--Tom
Hi,
 
These 7/16 x 20 bolts are available at McMaster-Carr online. They ship almost as soon as they get your order. For me in SW Michigan, I order by 5:00 and the parts are here by 11:00 the next day, standard UPS rates.
 
http://www.mcmaster.com/#standard-cap-screws/=ubn60z
 
--Tom
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
