I would stay away from the molded lining, that is what I had on the car before. It heats up rather fast and you get brake fade sooner. I just installed new woven lining on my Cord and must say this is the way to go. The woven lining with the Brass imbedded helps to dissipate the heat better than the molded lining. You must rivet these onto the shoes. Arc grinding is the way to go. In my case i used 1/4" thick lining instead of the 3/16" thick as called for. This was because I had over sized drums after turning and I wanted more thickness so that they would fit with minimal grinding.
 
Hope this helps,
 
Dan
I agree about the use of riveted lining on our old cars. Years ago when I was in the garage business, molded / bonded lining became popular simply
because it could cut costs for the brake shoe rebuilders. The old established
brake companies pointed out that baking the lining changes the coefficient
of friction as manufactured originally. We found that riveted lining could
outlast the bonded type. Production costs and power brakes trumped the
use of the riveted lining.
 
George.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
