The Startix is a very complex piece of the electrical system on the Cord cars. The wire you want to know about allows the car to start. The action works like this. You make sure the transmission is in neutral. You then turn on the ignition switch. Then press down fully on the clutch peddle. This causes the starter to start the engine. When the engine comes up in rpm that wire from the generator tells the Startix about this and cuts the starter out of the engagement. Now if the engine dies the engine will automatically attempt to restart because the generator is no longer sending a voltage signal to the Startix. Inside the Startix are three coils. Two of them can be adjusted from the outside case. This ACD club has members that can help with adjustments or rebuilds. A startix was common on Auburns, Pierse Arrows and a few other makes in the mid 1930S. If I have not been completely correct in this information someone will surely add to my information.
 
Gary Parsons
Hi Gary. A while ago I came across this You Tube film which shows how the Startix box works step by step.
Thanks to James Simpson.
 
 
The restart function can be eliminated by modifying the internal wiring of the box and a starter push button added.
Thanks Terry. That was a great piece of very clear information on the Startix.
 
 
Gary Parsons
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
