Give Doug Pray a call for the chain and clip. Stan sold this exact gas cap some years back. I purchased mine from him.Both Stan and Doug may have everything you need in the pic too.
 
 
Gary Parsons
The chain is miniature Sash Chain Size 12 . You will need 6" in length.
The chain can be supplied in nickel or stainless steel
The supplier is
Wm A Kilian Hardware Co, Philadelphia PA
Email hardware@kilianhardware.com
As for the clips the overall length is 1 1/8" and the wire is 0.045" diameter.
Just bend it up like in the picture.
As for the cap you may have to fabricate one to look like the original.
I am in the middle of completely restoring my Westchester which has been off the road or over four years now. The guys who did the body repairs had NO sense of urgency and did the work as a fill in job which took over three years. A lot of other factors have come into play such as a new set of pistons with the gudgeon pin holes 1/4" lower than where they should have been. The point is that I still have a long way to go so I don't want to be sidetracked making parts for others at present as it did not work out in the past.
Maybe in the future I will again look into making small parts for sale?????????
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
