Thanks but then less room in the back seat.
Was hoping I could fit in without modification.
I would be looking for a Custom Beverly which has the longer wheel base then you could mover the front seat back without making it too uncomfortable for the rear seat passengers.
The standard Westchester has a 125 inch wheel base.
The Custom Beverly has a 132 inch wheel base.
Mark Hyman has a super charged Custom Beverly currently for sale.
 
A friend here in Australia is a very "tall" super charged Auburn phaeton owner. His solution was to reduce the thickness of the seat back rest as he could not move the seat back.
Hi Richard.
As a mater of interest my Auburn mate will be visiting me towards the end of February. I will give him a drive of my Westchester to assess his comfort.
I am 5' 9 1/2" and have the seat back as far as it will go.
Hi Richard,
 I'm 6'2" and don't have a problem driving a Cord 810/812. It's a bit tight but not uncomfortable. Like Cliff suggests, on my cars I move the seat rails back a couple of inches which makes it a lot more comfortable on long drives. If you have people in the back seat it's usually for short drives, so just move the seat up to it's original position.
Jim
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
