Well I opened the sending unit and found plenty of corrosion but no damage. cleaned it and began reassembly. For those curious as to what is inside these Stewart warner sending units, these pics may help. If not please ask while I have this apart. The operation is really rudimentary. The arm has a float. In the electrical part that arm has a brass rub tab that not only rubs the rheostat but it grounds thru the brass rod bushing. Just follow the rub strip to the rod bushing to see what I refer to. I will caution anyone that feels they can repair a non working sending unit. They are very delicate. Had I not cleaned mine I'm positive it would not have operated. Also the old gas that I never put in the fuel tank really smells bad. I believe my car was off the road in 1949 but for sure any fuel in the tank came long before 1961 when my Dad purchased the car. He got it in pieces so it was long off the road before 1961 best I can tell by the paperwork from the last two owners before my Dad and I. Enjoy what I found.
Check this out on ebay.
not sure if correct for us
Well after attempting to repair my gas float I feel its well beyond saving. Just way too many cracks. I repaired several but still have probably 6 or 7 more to repair. Then I don't know how this heavy float will work. Plus how long will it be before another crack appears. It would be different if I could dip this float in solder but then how heavy or how long will it last.
I need to stick with "do it once and do it right".
Check out floats sold for Model A Fords. You will have to change the arm to accommodate the A float. Modern material good for modern fuels.
Cordially Mike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.



















