tHE HEX NUTS N BOLTS ARE ONLY REMOVED FROM UNDER THE CAR. pLEASE USE SOMETHING LIKE aEROKROIL OR pb bLASTER ON THESE THREADED NUTS N BOLTS. i BROKE ON OF THE REAR FASTENERS ATTEMPTING TO REMOVE MY TANK. aLSO UNDER THE FORWARD AREA OF THE TANK IS THE TANK LEVEL CONTROL AND THE SUCTION LINE. uNDER THE CARPET IS A REMOVEABLE PANEL TO REACH THIS. uNDER THE TANK IS A DRAIN PLUG. dO NOT TRY TO DROP THE TANK WITH GAS IN IT. fLUID WILL MOVE AROUND CAUSING ALL KINKS OF BALANCE ISSUES. dRAIN IT FIRST. iF YOU HAVE A FLOOR JACK IT CAN HELP LOWERING THE HEAVY TANK TOO. tHE TANK FILLER LINE WILL COME DOWN THE LONG SOCK WITHOUT ISSUES. yOU MAY FIND PACKING BETWEEN THE TANK AND THE BODY. iF ITS STILL IN GOOD SHAPE SAVE IT AND RE INSTALL IT. tHAT FILL TUBE IS NOT A GREAT SEAL TO THE TANK EITHER. tHE SHEET METAL SCREWS CAN'T BE USED ON THE ONE SIDE. sO LEAKS USUALLY HAPPEN. tHEY ORIGINALLY HAVE A GASKET BUT... lIKE IN MY CASE SOME "MECHANIC" SOLDIERED THE NECK TUBE TO THE TANK WITH THE SHEET METAL SCREWS STILL IN THE FLANGE... aND IT STILL LEAKED. iT WAS A HORRIBLE JOB HEATING UP AND WIRE BRUSHING THE SOLDIER OUT OF THE SCREWS. i USED DRY ICES AND ABOUT 1 GALLON OF WATER TO MAKE A BLANKET OF c02 IN THE TANK SO IT DID NOT BLOW UP. uSING A FLAME ON ANY GAS TANK CAN BE EXCITING.. Very sorry about the caps. I never learned how to read as I'm typing and I don't up occasionally.
 
 
Gary Parsons
Terry is correct, the straps hold up the tank. If you pull the spare tire out and the rug along side the spare you will see a well with the hex nuts and a long threaded bolt (the Tee Bolts from the straps). If you pull the oval plate under the spare you can access the wire for the fuel level gage and the fuel line on the top of the tank. Remove these before trying to lower the tank. 
 
Drain the tank before you remove it and take off the gas cap if you still have the chain on the cap. You also need to have the car on a lift or you have to jack up the rear of the car quite a bit to get the tank out as it slides to the front of the car and under the rear axle.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.

