

IÔÇÖll check tomorrow if I still have a NOS switch. If I still have one, itÔÇÖs free, only pay for shipping.
You have been sorting out problems with your brakes. Could this be related to the problem with your brakes..that the hydraulic brake pressure is not fully releasing causing your wheel to drag and your brake lights working intermittently? In other words, the brake light switch is ok and you have a problem with your master cylinder, adjustment, brake lines, wheel cylinder or springs causing the problem. If its the brake light switch, thats an easy repair except you have next to no room to replace the switch.
If Cliff doesn't have a spare try calling Carol in Wellington Kansas. She has one listed in my parts catalog.
 
 
Gary Parsons

Thanks. I will try Carol.
 
Also, have thought about perhaps too high of a pedal being the issue. We started with it way too high, adjusted way too low and now we are getting brakes 10% off the top and they do not lock up anymore. However, we do see the brake lights coming on for no reason.
Carol is open Monday thru Thursday 10 to 4. You might be able to take the switch to a quality auto parts near you and see if its available. Or maybe find a part number and manufacturer. Then check Ebay.
I just checked Ebay and found some Chrysler cars appears to be a close match. The ebay store is out here in California. Its called oldtime parts or something close to that. The Caputo family owns it.
 
 
Gary Parsons
Well... So far several very knowledgeable sources have told me the brake switch was shared across many different cars. So I'm sure any quality Autoparts store like Nappa will have this pressure switch. Ebay has probably 10 of them from around $5.00 up to $25.00 for the same switch.... Gamblers choice....
 
 
Gary Parsons
Autozone Duralast
F4805. 
$11.99

Thanks guys, I've ordered a couple of switches based on your suggestions and some emails from other members. I'll let you know what works out.
 
A.J.

Follow up. First autozone switch we used failed. I cannot find the part number. Sorry.
 
The Duralast Stoplight Switch F4805 does not have screw on ends.
 
We just swapped in a Standard SLS24 which has the screw connectors. The brakes lights are back to working. If that switch fails I will update.
You can always use a motorcycle pull switch.
Easily found on Ebay or Google Images.
Then you don't have to keep bleeding the brakes.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
