

At one time a member named Charles Segenak was reproducing these and I recall he told me they sold for $2500.00 a set. He also made show non functioning original bumper jacks strictly for show as they did not work. But NOBODY would actually use a bumper jack on any CORD because they damage the body and the bumpers. This is the reason most owners would discard them for sizzer jacks.
 
 
Gary Parsons
Can anyone tell me where I can find a cross-section diagram or exploded parts diagram detailing the supercharger on an 812? I recently acquired one, maybe sitting 20+ yrs, isn't stuck, but tried prelubing the oil system via the outside gauge connection, and only thing I could get thru the system was pure WD40, which never showed pressure on an aftermkt gauge, but ended up in the pan. I want to understand the design of the SC if possible before attempting to start the engine and lube its bearings if possible.
Ken Nelson - Citroens, Panhards, other oddballs
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
