

Hi Dayton,
I'm not sure how they they got the 8 louvers on a standard body. I would like to get a close look at the car in person. It almost appears the louvers have been lowered but I really can't tell from the photos. There are several tings on this car that don't add up. I appears there have been a lot of changes over the years to the car. I would like to see the rest of the numbers on the car to have a better idea of where it fit in the production. That might give some clues.
Hello . The car in Question is 812 1518 S FB 358 Ron Irwin commented about this that it was a non factory change on the louvers .My only thought was that somebody used a LWB rad and to make it fit modified the louvers. R
 
Randy, so does this mean its a Beverly without the traditional bustle trunk? Only reason I ask this is the "S" at the end of the serial number generally means the car you might be looking at anywhere is a Beverly Sedan. This is still a very nicely finished car.
Hi Dayton. To Recap what we know and don't know. The model 812 serial number 1518 tells me the car is a 1936 that was renumberd by the factory (or dealer) as a 1937. There should be an S at the end of the serial number to indicate it's a Beverly as evidenced by the interior. The engine number and the interior indicate it was a very early 1936 (originally).
 
The inconsistencies include outside exhausts, locking glove boxes and no cowl fillers, all of which could have been changed or added during a restoration. The big one is the 8 louver fence. while we have a could of theories on how or why this was done I think it will take a knowledgeable Cord person inspecting the car to see what is going on.
 
To Ron's point there are some inconsistencies, that from a history point, would like to be sorted out. But it is a Cord and it had all Cord parts (at least the major items). If you are looking for a "correct" Cord you might want to keep looking. If you are looking for a Cord that you can drive and enjoy then that's a whole set of different questions that need to be asked.
 
Good Luck. Jim
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
