I made up a simple frame on castors then reworked it to be able to rotate the engine.
I can't add pictures to the Forums and I don't know why.
What is your email address?
Hi Terry.
My email address is toddpuzey@gmail.com
 
Cheers, Todd
Hi Fireguy,
Once you pull the engine and trans separate them on the floor. Then engine then mounts very nicely on a standard engine stand. For the transmission use the mount that's on the cross member and put the mount on a 2X4. Once you have each done you can reassemble them on the floor and then lift them into the car. I found this is the easiest way. If you try keeping them together you are just going to make more work for yourself .
Jim
Shown is my modified version so I could install the timing chain and sprockets. The first version was simpler.
Tom
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.

