Terry This catalog listing may be for the 1936 810's with Lockheed brakes.
!937 production used Bendix brakes. The master cylinders were the same for all 810 & 812 Cords.
Hi George, yes you are probably correct however Aris was trying to get an idea of his wheel cylinder and mast cylinder sizes.
I assumed the master cylinder used on the 810 and 812 was the same size but was not certain.
Hi George,
Yes I heard the masters were the same and wondered about their bores, anyway I'm now going to a 1' Bendix master hoping to have better performance. Aris
Hi Aris.
I agree a smaller bore in the master cylinder should give a greater braking force at the wheel cylinders. The hydraulic ratio is F2 = F1 x A2/A1
Where F2 is the force applied by the wheel cylinders, F1 is the force applied by the foot , A1 is the cross sectional area of the master cylinder and A2 is the cross sectional area of the wheel cylinder. Well that is the theory behind it all.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.

