Hi Tom, thanks for the photos. IÔÇÖm assuming that no one reproduces the wood pieces, so I will have to make replacements. Luckily I have a full wood shop as well.
Dimensions would be greatly appreciated!
My 37 Beverly sedan does NOT have any wood around the Bustle trunk or inside the body. It actually has outside lid hinges. They are a close replacement the Chryslers have so you can purchase plenty of those on ebay really cheaply. Last I checked I had 2 complete hinge sets. My 37 was built in the first or second week of January 37 and its defeinantly NOT a renumbered car. So dictates in the engineering  change book.
 
 
Gary Parsons
Todd the hinge mounting in the sedans is different to the phaeton.
You are lucky as I saved all of the original wooden pieces from the frame in my Westchester.
I can send you templates. What is your postal address?
Send it to my home email .......... tandgc@outlook.com
There is also metal sheeting covering all of the wooden frame. I see you have the lower strip of wood that goes between the body and cross member.
As always, thanks for the info gents, and I very much look forward to receiving the templates Terry!
 
There are supposed to be thin metal pieces that cover the wood surround once itÔÇÖs installed and they are painted body colour. The passenger side vertical piece of the trunk wood cover is still there on my car (with no wood behind it) but the rest are gone.
If anyone has some extra of these laying around I would be interested in them!
Tom I have no wood at all for my Phaeton, how can I get in touch with you to get dimensions/patterns?
Thanks
Russ
Russ:
Email me at twilcock@hotmail.ca and I can give you dimensions of the wood for the Phaeton trunk opening.
Tom
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.





