I had this same problem with a 1935 Auburn. After replacing the inner cable, sending the speedo to a shop several times with the same results, I finally replaced the outer cable housing and it stopped. There was a problem in the housing that couldn't be seen.
CORDially Mike
Thanks guys!
George you might be so right, I have not lubricated the lower part of the outer cable, just the cable when inserting it from the top which has been done many times so far, so I will certainly try this. How did you lubricate the lower end? Maybe with a lubricated cable length from that end?
Mike I have tried with a short cable and a hand drill the speedometer that seems to work okay so as you say, I'm afraid the outer cable is the culprit, in which case the big problem is routing it in place, especially where it enters the floor of the cabin where my excellent carpet and the firewall carton have to be removed....
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
