I recall two different size seals for the front axles. But try to get the internal size where the shaft rides and the external size that fits the hub. That that and the old seal to any large bearing supplier and sak for help. I can search my records tomorrow for the size seals and part numbers I used.
 
 
Gary Parsons
There are several that will work. CR 21100, CR21103. They are the same ID and OD. CR 21100 ss .438" thick. CR 21103 is .375" thick.
 
Note: CR is Chicago Rawhide which is now owned by SKF.
Chicago Rawhide or CR is a name. You probably won't be getting a rawhide seal. The Co. was in business back when rawhide was the material in their seals.
CORDiallyMike
i mentioned how my front spindle had a wear channel front the seal riding on it. These are a part worthy of repair and I thought I would share this video of a very similar shaped part that was being repaired and it is a method that work with the Cord front drive steering spindle. Its an interesting watch, my only concern would it draw the temper from the part, this is explained late in the video and it is not a problem.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
