Thanks Terry, the drawing is very helpful and not what I expected.
I thought that the back of the stick would have a V-cut to match the windshield post. The 1/2" radius cut is a lot easier to make but it does leave a gap that I don't care for on both edges.
The 1/2" radius cove on the top edge appears to be upside down or am I
mistaking?
In order to install the wire-on in one piece I would have to modify the bridge piece of wood in that area which I am not sure I should do. I will e-mail you a picture of it as I do not know how to attach pictures in this forum.
Thanks Steve
It is the edge strip material that fits along the bottom of the headlining above the windshields.
It has a U shaped woven wire inside it so that it can be opened up for fixing in place with tacks etc then closed back up. It is also used around the door openings. It is also called wind lacing.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
