You will likely have to remove the oil pan to re weld the nut inside the pan.
The usual cause is that you are tightening the steel drain plug into the steel nut that was tack welded in the pan. Owners should use thread sealant to avoid overtightening the plug.
Josh suggested using a valve instead of removing the plug each time. Us valve on my Auburn and Cord L-29.
CORDiallyMike
Removing the oil pan is the only way to fix this correctly now. Cleaning the plug area around the pan is going to be the hard part. Welding the threaded part is simple. Either silver solder it or braise it from the inside. That way the outside will remain original in appearance.
 
 
Gary Parsons
Magnetic plugs are available from McMaster-Carr.
CORDiallyMike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
