John,
You have to make your own. I use a piece of felt wrapped around a piece of rubber. You can get the felt at Joann's. The rubber is a piece of appropriately sized weather seal. You can glue the felt to the rubber and insert it in the channel.
I think the discussion got switched from rubber to felt. If we are talking about the rubber that holds the glass in frame, contact Ethan Turner
 
 
 
 
 
 
 
 
 
 
 
 
 
 
if we a
I am talking about the rubber that goes in the stainless channel between the rubber and the glass - there is sort of a decorative bead on it between the glass and the stainless channel the glass it retained in ( ie. NOT the channel the stainless frame slides in when you wind the window up and down). Basically, on any other make car you would use Glass Setting Tape, but a Cord used a special rubber to hold the glass into the stainless frame.
 
As to felt for those doing other projects - such as on back sides of cowl board or under carpets (possibly they make really thin for window channel too) - I use this company (my upholster gave me the referral) https://www.sutherlandfelt.com/felt/ecofelt/ and https://www.thefeltcompany.com/eco-felt/
Looking at my copy of Stan's catalog, its is not obvious what part number i would order . About as confusing as the initial discussion. Could you find the part number that you ordered or call Stan's and they could tell you what part number you got.
I would like to get some also.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.

