
jim was this "up to 1 inch of lead" you found in the rocker panels factory or something a shop did because thats what they had at the time. I have found some amazing ( crazy) ideas of how my Beverly has been fixed in the long ago past. My car came with no bustle trunk latches. It was opened by pressing a button on the dash to trigger a spring loaded solenoid valve. It also came with a smooth steering wheel and the driver had a spot light to use if required for whatever. All the trunk latch body work to cover the holes in the lid or body were done so nicely I had no idea it had been done. It was perfectly blended to the original sheet metal. The inside of the trunk had pieces of brass shim stock soldiered in place to plug the holes. I had not worked on the body latch cover holes because this promises to be a huge for me undertaking..
Its amazing what we find in our cars from years of "fixing them"...
 
 
Gary Parsons
Jim this does sound pretty extreme, can you post a sketch of where lead was applied to a 1" thickness to give us a better understanding?
I have seen lead 1/4" thick on some Cords here in Australia.
As to repair work, the door gaps on my own Westchester were all over the place.
During the restoration we found extra skins were placed over some of the doors. I have no idea if this was done in Canada of the US. We spent a lot of time and money getting things back to square one.
Terry I bet the extra door skins were a surprise finding during your body restoration. Now I'm going to be looking closely at my doors for this too.
 
 
Gary Parsons
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
