Friends,
 
 
Thanks for the tip but as I am in Brazil it is very difficult to import this type of part. What I need is the design of the original exhaust system so that I can replicate that in Brazil.
 
Abs
My Westchester exhaust system is in pieces so I can display a set of pictures.
Also do you have the exhaust pipe support brackets?
I have drawings of all of them.
These club members are correct. Best I can add is under my 37 Beverly sedan just after the two header down pipes was a muffler type collector that had two pipe ends on the inlet side where the headers came down off the manifolds. But nothing more was on my car when we got it in 1961...
 
 
Gary Parsons
I pulled out my exhaust system and took pictures of the components in different views so you can see the various angles. Oddly I can't find the long pipe. It must be somewhere in my garage, however with the pictures you found and mine you should be able to sort it out. With the pipes that connect with the manifolds it would be safer to do them in two pieces and weld them in the straight section.I will dig out drawings for the brackets and post them soon.
The exhaust cutout listed in the Cord Accessories booklet looks interesting .
Anyone have one fitted ?
I have only heard seen one on a supercharged Caberloit. It was Henry Portz Cab. Have been told cutouts were only on the supercharged cars. Have also been told thats not true.
 
 
Gary Parsons
When we visited Henry and his family back in 2011, I had a drive of that "fabulous" cabriolet. The cut out had a slight leak as I think it is almost impossible to seal the original type. The exhaust system is normally pretty quiet and the leak sounded a bit like a manifold gasket had failed with a slight chuffing. I have been looking at a vacuum operated butterfly type that can be grafted into the "Y" piece.
When I heard a Duesenberg driven through Auburn, Indiana with the cutout wide open .............. so did everybody else. Wow! The way to go. Unfortunately they are illegal in New South Wales.
A cutout would possibly be legal in NSW if you were to fit a screwed cap on the outlet before inspection, but that weirdo FB engine firing order ( what were they thinking ?) would probably sound more like 2 x 4 cylinders. than a V8,...... not sure though, certainly not like a J anyway.
Why not fit one Terry, and post the soundtrack here ?
Graham, talking to my local car club registrar he explained that period accessories were acceptable, consequently registration is no real problem.
He did say "You wouldn't use it would you? I replied with a big smile "Sure would but only on special occasions."
How on earth can you say "Weirdo firing order?" You were into Cords long before me. Everything is special about our Cords and the firing order seems to be quite ok as the FB engines run so smoothly and sweetly.
About ten years ago I started my engine with only the header pipes connected to the manifolds. I had removed the "Y" pipe. At idling speed I expected the exhaust to be pulsing. It did not. It was making a hell of a lot of noise. Perhaps if there were two long separate pipes you would get pulsing however with a cut out in place I should expect a healthy R-O-A-R.
I think Josh Malks had one fitted on Moonshadow, perhaps some of the other members can enlighten us on this.
Besides why should the Duesenberg people have all the fun?
The exhaust cut out was available on all Cords. The original set-up was a "mickey mouse" set up with the cut out located under the front floor board and a wire coming up thru the floor board with a 90 degree bend on it to act as a lever. The cut out did not seal very well when it was closed so it still sounded like there was a exhaust leak. There was an original one in Auburn many years ago. The sound was not very impressive.
 
The J Duesenberg cut out out is very impressive to listen to. I think this is due to the way the cut out is piped into the system. Take a look at the exhaust system some time. The cut out is located at the end of a large straight pipe, not just a Y off the exhaust pipe.
I received a reply from a company called Pro Flow Exhaust regarding leakage with the modern butterfly type vacuum operated cut outs. In short they all leak a bit. The original owner of my Cord was a very conservative person even wearing a bowler hat. I cannot imagine him roaring around making a lot of noise. When I first started the engine with the new exhaust system supplied by Don Simmons in Canada I was delighted with just how quiet the car was consequently I feel I should give the cut out scene a miss ....................... although we could have had some fun with it on "special occasions."
Over to you Graham.
Yes, I am getting old Graham and cranky.
I would like to have an exhaust cut out that works properly but they all leak.
I don't want leakage.
I want it quiet when running and roaring when you want it.
It seems I just want too much, unless I invent an effective cutout myself.
In the owners manual for my 1910 Mitchell it says " The cut out is for use in town" Let that be your criteria for use! Let the good times ROAR.
CORDiallyMike
Our timing order is "different" from other V engines. They fire ALL cylinders on one side of the engine. Then switch to the other side of the engine. When I was running my engine in my car with just the header pipes off the exhaust manifold it sounded very throaty. At one time I reduced the idle down so far you could actually see and count the cylinder explosions on each cylinder on one side. Then the block will roll over and the other side fires. My engine would rock in the motor mounts slightly. Sadly I do not recall what the rpm was as I was doing this. It was 44 years ago.
 
 
Gary Parsons
Mike, I'm confused did he mean use it to Cut The Sound Out?
I suppose towns back in 1910 were pretty quite so it helped with advertising to blast along and get everybody's attention.
These days it would get you is serious trouble with the law in Australia.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.









