It probably is the idle circuit in the carb. The two adjustment screws in the base can change that by screwing them in or out. Getting them balanced takes some talent. When did this start happening? I do NOT feel its the mechanical advance in the distributor. An easy possible fit is to try tightening the four base nuts that holds the carb to the supercharger.
 
 
Gary Parsons
Rich idle circuit, vacuum leak??
CORDiallyMike
Jack! Good to hear from you! The idle problem seems to have gone away on its own. Though I haven't driven Geneva recently, my last outing was a 2-day affair with multiple stops and starts along a touring route with several dozen other historic automobiles. The Cord ran like a champ - though I did notice some exhaust backfire once the engine was warm at higher rpm. I was thrilled she started and stopped 7 times in one day!
-Michael
Trevor, thanks for the help. I will try that this spring. Right now my Cord is up on my parking lift with another car below it - and it's tough working 6 feet off the ground!
-Michael
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
