I took this above picture of an unmolested Cord at the 2018 west coast meet in Morro Bay. It is Asbestos pipe insulation commonly used in the power plant steam line insulation. Today we can make up insulation that is non Asbestos. It comes different pipe sizes and thickness. I believe this was 3/8 or 1/2 inch thick.
 
 
Gary Parsons
Hunting who I bought the 1939 LaSalle exhaust wrap from, but it was basically the same as this (as a sidenote: the stuff would not keep for really long as it is "wet" in a plastic bag prior to installation - it is also somewhat fragile to install:
 
 
REPRODUCTION. E.H.P. Wet Blankets incorporate an inorganic bonding agent to form a very pliable product that can be molded to conform to any irregular surface or contour. When cured, it hardens, allowing it to be sawed, cut, or sanded, and is usable in temperatures to 3200 degrees Farenheit*. Heat can be cut down anywhere from 50 to 75%. The E.H.P. Wet Blankets have been widely used for exhaust systems, turbo charger applications, and anyplace that heat needs to be retained within its source.
 
It is supplied wet in a sealed bag. It should be stored in a cool place and kept from freezing. Complete instructions are included with 3 mounting straps.
 
https://engineheatprotection.com/hot-rod/
 
https://engineheatprotection.com/product/e-h-p-wet-blanket/
 
Sidenote: You can see a picture of the Duesenberg that Randy Ema restored for Jay Leno getting insulation added to exhaust.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.

