Before recommeding a purchase you need to know whats there and whats missing. From your pictures I can tell you both front and back bumpers are missing. What you have are wrong. Also my guess is someone repinted the car and covered the chrome fence molding so nobody can tell you if its able to be saved or not.The drivers side windshield vacuum motor is missing as it the wiper arms. No wheel covers are seen in any pictures nor is the transmission Cord badge.Might explain a little more about this car too like price, engine and car serial numbers will tell you the history of this car.
 
 
Gary Parsons
Give it a wash before your wife sees it.
Pete from Canada
also missing. trunk latches with fence stainless, gas door handle, fender stone guards and bumpers...there goes an easy $4,000 for the exterior chrome parts.
i've heard "there's nothing more expensive than a cheap avanti" just put the word" cord" in and that works too. realize this will just be the beginning of the spending . however, if you've dreamed of owning a cord and the price is good it might be just the car for you. i bought a couple "cheap cords" 20 years ago.... and i've enjoyed having them the whole time ( still not done yet).
Depending on what your intent is, makes a big difference. Driver, show car, parts car, car to park in the barn and say "Hey, I own a Cord". Although the car looks fairly together, you will most likely find a long list of missing parts or items that are in disrepair. As with any restoration, inventory the car, list what needs to be done, then TRIPLE it. Engine rebuild, interior, chrome work, electrical, brakes, etc. can be expensive repairs, Would you be doing most of the work? I took on a similar project, my 1936 Cord 1752A, fully knowing what was there and not there, and still found more than I bargained for.
Bill Heisler
36 Cord 1752A
Are parts or replica still aviable to buy? I know the seller pretty well and he already own 2 Cord' date=' he told that he "sould" have those missing parts but im pretty sure that's not gonna be an easy work to do. I don,t want to begin the restoration before some years because I have 3 young sons (5, 3 and .4 years old).[/quote'] 
Knowing the owner like you posted helps. For me to "know" the owner thru you tells me even more. Owning other Cords and seeing this one tells me the missing pieces probably installed on those cars to complete them.
Answering you question about parts or reproduction parts is a simple yes and no. No trunk patches are being made especially the passenger side locking one.Its original design was YAHLE and it has a cover over where the key fits. There is another car that has a close fit looking locking latch. Door handles are not made but you may find some in personal collections too.Hershey swapmeet or the ACD festival has a smaller swapmeet where mainly Auburn, Cord or Duesenberg parts are traded or sold. It happens next weekend. The inside and the engine pictures can tell use even more as to what may require repair or replacement. Mostly the serial numbers that can be found on the passenger side of the panel under the open hood.
Having three young sons is a blessing too.I put my Cord "away" for 38 years while my family grew up. Please share more information thru pictures of this car 
 
Gary Parsons
Yes this is an unknown Cord that is not on Ron Irwin's list!
 
Terry, Regarding you earlier post - I could never afford a fully restored Cord, but by buying one that needs restoration, putting in my own labor and many years of incremental costs I was able to have a nice car. Also doing it myself the Cord is what I want and I know it is done correctly! The side benefits are the friendships I've made over the years, the knowledge and skills I've gained and the look on my Dad's face when he first saw the completed car. Also driving a well sorted out Cord is pure NIRVANA!!!
Jim: There is so much to be said that we as members of the ACD Club are preserving and maintaining these wonderful cars. In restoring my 1936 Cord, I have achieved what I set out to do. "Understand in detail how these cars work." I have been fortunate to able to have the body work done, transmission rebuilt (Thank you Lee Foldenauer) and have the engine rebuilt, with a hand in all of it. My original goal was to learn in detail how these cars worked and how they were put together. As I reassemble the 36, I am putting this car back together bolt by bolt, and in a manner that I understand how they were put together and ensure that they are put back together as originally planned. I will have the interior work completed, as I do not have the tools or knowledge on that side of it. But, I will ensure that it meets my expectations. It is a long learning process, but very rewarding.
 
Bill Heisler
1752A
when looking for the frame numbers they are about 1" tall but very slender and faintly stamped. if i remember they are between/near 2 large rivets just a few inches forward of where body mounts to stub frame. facing outward. if the frame has rust or any coatings on it they won't be legible. i've found a bit of fine steel wool with some lacquer thinner can bring them out. note:sand paper can destroy them. the use of a bright light shone across the surface sometimes helps too.
 
This is sooo true. I was lucky finding my numbers on the frame. About 40 + years ago I had the complete stub frame stripped at a shop called Strip & Clean.All the years of dirt and grease were chemically removed to bare metal.I have painted this frame and can still see the numbers. I think steel wool is the best idea with some paint remover.If in fact any paint is one this area. Would like to see the interior and the engine pictures too. Especially the engine sreial numbers to confirm this is the born with engine. For all this forum knows this car "could" have been repowered to rear wheel drive.
 
 
Gary Parsons
I'm gonna took pictures next week of the engine bay and the frame numbers.
Thaks all of you for your comments! And sorry for the mistake, i'm french canadian !!!
Mathieu
Do you know from experience Pete?
CORDiallyMike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.



