What are your intentions for this car? If you plan to make a driver then some owners feel modern tubeless radials are the best way to go. If you plan for a best of show type judging then bias ply double wide whitewalls. They are probably going to cost around $2000.00 or more because they are old and very rare. Some like the Coker tires and some prefer others. Some cars look very nice with a black wall tire too. Others will chime in with what they use and hopefully WHY they choose them.
 
 
Gary Parsons
Buy tires when you are there, not getting closer. Time seems to fly and before you know it your almost there turns into 2 or 5 years and
now you have old tires again. Have seen it happened many times. Just a suggestion.
CORDiallyMike
Good point made by Mike. Also remember that any radial tire has a recommendation to replace it at around 5 years irregardless of miles because of ply separation between the radial ply and the body of tire. Bias ply tires do not have this separation issue.
 
 
Gary Parsons
I like the 6:50 x 16 Goodyear tires with the ribbed whitewalls - a well built tire that I have been impressed with on road via multiple cars. I get them through Kelsey and I saw Universal was was also handling. http://www.kelseytire.com/pages/antique&classictires.html
 
As to Radials - I would try the Diamondbacks.
 
I thought the Coker radial tended to have too aggressive of a pattern on the inside of the casing and seemed to be hard on tubes.
I've got Coker Classic radials with 3" wide whitewall on my Cord 812 Beverly and I like the look and feel. I put these on last year as they were recommended by a friend that owns a large tire business in the DC metro area, and I wanted radials for the road feel while driving. I've been happy so far.
I also have Diamondback radials with 3.5" wide whitewalls on my Glen Pray Auburn Speedster, and they look great and drive superb as well. These came with the car, so I didn't have anything to do with picking them, but the 3.5" wide whitewall I think is striking. Some photos.
 
-Michael
 
 
 
 
 
I had the Coker Radials on my Westchester. I had one totally disintegrate at 75 mph near Toledo. Coker just said I needed to replace the tubes every two years. I changed the tubes. Had a rear tire go flat on a show field and the a second tire blew again at 75 mph. All within a year. Coker would not stand behind the tires. I threw the remaining tire away and will not put a Coker back on my cars.
 
Just my thoughts.
Diamond Back, Yes.
CORDiallyMike
I will 100% endorse Curt's recommendation: I have installed several sets of the Diamond tread Goodyears with the ribbed sidewall (available in a whitewall or blackwall) and have been most pleased - I currently have a set going
onto my current restoration too. And, was just on the phone a week ago with a friend who swears by them on Cords - agrees that they are a fabulous look matched to a fabulous road tire. I buy from Kelsey Tire though all be it have bought countless sets of tires for non ACD cars from Lucas and Universal, plus Coker.
Tim, I think the problem is the tubes, not so much the tires. I understand the Coker radials are designed to use tubes and I don't know what the difference in tire design is. I think it was Harry Golden that ran the Cokers without tubes and never had a problem (although the Cord Gods really looked out for him) and I have heard of a couple of people that used other tubes in their Coker Radials and didn't have any problems.
 
Since I had two of them blow out at speed I'm not taking any more chances with them.
 
May you have many more miles of "Effortless Motoring"!!!
Here is my two cents worth to the tire discusion
My wife and I were planning on taking our 37 Cord to New Zealand and were going to be driving it on both islands. I decided to replace the 4 road tires before the trip. What to put on? The Cord came to me with Firestones belted. Should I go more Firestones ( I like the look of them on the car) ? Or should I go with radials. A few years before I had purchased a 37 Cord for a museum that I volunteer for and it came with radials. So I brought that Cord home to my house and switched the wheels and tires with my belted tires so I could test drive my Cord with radials. The radials were Diamondback and the wheels that they were mounted on were modern replacement wheels without tubes. My driving impressions with them on my Cord were that the steering was harder at low speeds, the car felt more sure of itÔÇÖs self on the road, it cornered better and I found myself driving harder into curves simply because I could. I had to mildly adjust the rear fenders so the radials would not hit them when on my Cord. My decision for New Zealand was to put on the car a new set of Firestone belted. My reasons were I was concerned that I would be temped to over drive the car and being on all strange roads it would not be a good idea. Also my concern was that I have original heavy duty wheels on my Cord and I thought that if I over drove the car I could crack a wheel and maybe a even a front hub. And there was a question of, do I put tubes in the tires as I would be using original wheels or not. If no tubes, would the tires hold air for 3 months that it took for the car in a container to get to New Zealand and if the tires were flat what would the warehouse do, maybe just drag it out on the flat tires. The belted tires I feel ended up being the best choice for me, they were a known factor and I had a good handle of there adhesion properties to the road. In New Zealand we had many days of rain, a lot of that in mountains and hills on narrow roads with many switchbacks. The belted tires did not hold well in the tight wet corners, but I knew their limit. We went 2,000 miles in NZ and no tire or wheel problems.
My wife and I were planning on taking our 37 Cord to New Zealand and were going to be driving it on both islands. I decided to replace the 4 road tires before the trip. What to put on? The Cord came to me with Firestones belted. Should I go more Firestones ( I like the look of them on the car) ? Or should I go with radials. A few years before I had purchased a 37 Cord for a museum that I volunteer for and it came with radials. So I brought that Cord home to my house and switched the wheels and tires with my belted tires so I could test drive my Cord with radials. The radials were Diamondback and the wheels that they were mounted on were modern replacement wheels without tubes. My driving impressions with them on my Cord were that the steering was harder at low speeds, the car felt more sure of itÔÇÖs self on the road, it cornered better and I found myself driving harder into curves simply because I could. I had to mildly adjust the rear fenders so the radials would not hit them when on my Cord. My decision for New Zealand was to put on the car a new set of Firestone belted. My reasons were I was concerned that I would be temped to over drive the car and being on all strange roads it would not be a good idea. Also my concern was that I have original heavy duty wheels on my Cord and I thought that if I over drove the car I could crack a wheel and maybe a even a front hub. And there was a question of, do I put tubes in the tires as I would be using original wheels or not. If no tubes, would the tires hold air for 3 months that it took for the car in a container to get to New Zealand and if the tires were flat what would the warehouse do, maybe just drag it out on the flat tires. The belted tires I feel ended up being the best choice for me, they were a known factor and I had a good handle of there adhesion properties to the road. In New Zealand we had many days of rain, a lot of that in mountains and hills on narrow roads with many switchbacks. The belted tires did not hold well in the tight wet corners, but I knew their limit. We went 2,000 miles in NZ and no tire or wheel problems.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.





