Terry, These are so much better than the copy Stan sent me way back in 1975. I never had anything telling me what each firewall hole or screw n bolt hole were used for.Much appreciated too.
 
 
Gary Parsons
You are probably 100% correct as my Cord being an early production car has a Crosley radio ................... now. ( Read on )
The firewall diagram says use hole No 18 for the antenna cable however hole No 19 worked out much better. As the radios were fitted at the dealers I guess it does not matter which hole was used. I had discovered that my car never had a radio when it left the dealers simply because the holes to fix the under floor aerial brackets had never been drilled in the cross members. The radio had been installed later with a telescopic aerial.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.



