And now onto my tail lights. Some of you may remember that I asked on this forum several weeks ago how to access the tail light bulbs. And now, while I understand how to do it, my rear lenses are simply not budging. At all. Period. So, I removed the entire housing from the car, scored the original frosted glass, broke it, and removed the glass to get access to the bulb (figure easier to break the frosted glass than the red glass lenses - sorry glass!). I then removed the original 6V bulbs from the sockets. With the original bulbs and rear frosted glass gone, there was room inside for modern high-output 12V LED tail/brake bulbs. To mount these bulbs, I fabricated a round aluminum plate which attached to the original housings via two 8-32 holes I drilled and tapped. On the aluminum plate is mounted a modern removable bulb housing, and in the housing is mounted the LED bulb. When installed, these bulbs provide exceptional brightness during the day under braking and at night. And the bulbs can now be removed or replace quite easily from inside the trunk. And all the original 6V wiring and bulb housing are still intact.I also added an aftermarket turn signal stalk, and wired that to the these tail lights. So the tail lights work with the original headlight switch, brake lights come on when you brake, and turn signal flash when you're signaling a turn. Modern day convenience.So now I have very bright LED headlights, bright LED tail and brake lights, and turn signals. I still intend to add a set of two third-brake-lights inside the rear window, but that if for another day.
And here are some night time pictures on my driveway. The lighting shown is only from the non-original 7" LED driving lights - the original Cord headlights are still closed. Took Geneva out again this evening to snap these photos - like driving in a modern car. Low and high beams are excellent. Now I can go out for dinner after dark!-Michael
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.









