I had the same problem on my Cord. It turned out to be the oil pickup was partly blocked. Had to take down the oil pan and replace the pickup with a better unit
 
Mark
Thank you ACD Forum Members for your replies to my cars problem .
I think you have pointed me in the right direction so I will get into it in
the next few days ( probably the weekend ) . Any more thoughts that
anyone may have are welcomed .
CHEERS
MICK
Curt: My pickup tube had been installed wrong. All it had was a tube with a screen on it, no floating "cannister" head.
Any small amount of debris would clog that small tube. It was changed-out to an auburn type pickup floater-style.
Is the oil pressure relief valve on the outsider of the engine as Auburn?
CORDiallyMike
Here is what and where you will find the oil pump pressure regulator valve and spring. They are located on the pump cover at the bottom.Mine has two nuts added to shim up the spring for higher pressure. They have been lapped to a particular thickness too.You just remove the nut that is actually the spring cover.Out come the spring and maybe some shims.Then a magnet might be needed to pull out the valve. Hope this helpyou and maybe others.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.






