In the second last Newsletter is a detailed article on how to set up all of the switches correctly.
I had trouble with selecting gears and traced it to worn keyways in the small cross shaft at the front of the gearbox. Things would get out of synchronization.
To avoid crunching gears when stationary I fitted micro switches to 1st gear and reverse with indicator lights under the dash. You know if the gear has been engaged by the light. The attached picture shows the micro switches with the gear box cover removed. 
I am not an expert on the Cord gear box however I do know that everything has to be adjusted correctly. There is a book on the Cord gear box written by Sid Ayres available from the Museum in Auburn. It explains how to adjust all of the switches including the clutch switch.
You should also clean out the filter on the LHS of the gear box and fit high powered magnets to the drain plugs to prolong the life of the gears etc. Your wife is a very lucky person .................................. WOW what a present !
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
