72 lbf with lubrication or 120 lbf without.
Under-torqued lug bolts are known to result in cracked wheels.
Where did the torque figures come from that were mentioned?
Cordially Mike
I cannot remember where I read or got the setting that I use but it is 90 ft lbs.
I have driven my car 10,000 miles in 5 years and have not had any trouble.
I had also fitted replacement steel rear hubs and Richardson drive shafts.
The real problem is the original cast wheel hub flanges are too thin and flex.
Regards,
Terry cockerell
I have not found any bolt torque specs for stock wheels/hubs.
 
On the Richardson driveshafts and hubs 95 lbs ft (no mention of lube on threads)on the lug nuts.
On Don's wheels 110 lbs ft (ARP lube on threads).
 
Frank
Caution on ARP lub. Not to be used on non ARP fasteners!!!!
Cordially Mike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
