Hi Tom: I'm told a radiator will seek its own level. I would guess mine runs as low as yours. No overheating. And yes, make sure the core is covered.
Tim
Is your cooling system pressurized Tom?
CORDially Mike
No Mike, it isn't. I have seen some people with at the most a 4 pound cap which doesn't seem like it would do much. I haven't ever had to add water. Not having to add water means my additives have not been diluted, which I like. I haven't had problem with my engine running hot. Some years ago I rebuilt my water pump using Henry Portz rebuild parts and new cylinder heads.
When I started working on the engine block some years ago I scraped the inside of the block with a long, narrow blade, common screw driver. I used a magnet on a long flexible shaft to pull the scrapings out of the block. I kept these scrapings and when I measured them, it was over 6 pounds of rust. I feel that this was worth the effort.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
