Sorry the leaks are messing up your car but. Try placing the warped piece on a mirror with some wet and dry sandpaper. Reason I say use a mirror is they are much flatter than plate glass. If a mirror was wavy the reflection would be odd looking too. Kind of like what we look like in a funhouse mirror. Use some 300 grit paper. If there is some low hanging pieces of the cover just rub the edges on the wet and dry paper.
Now about the exhaust manifolds. Contact Stan at Auburn Cord Parts in Wellington Kansas. He has the brass nuts that are made with a larger thread for worn out manifolds. That might be the best way to fix them without replacing them.
At the base of the carb is the cast iron mount. On one side of this will be the carb model. Hopefully it will say EE15 but there are several carbs that fit the intake manifold too. If the engine is supercharged the number should be EE25.
Carb for non S/C engine is EE15
Carb for S/C cars is AA25
Carb for non S/C engine is EE15
Carb for S/C cars is AA25
Sorry for the incorrect supercharged carb number. Right after I posted it I felt it didn't look correct but glad this was rectified.
Brian is in the Directory big as life, page 36. Are you looking in MI.
Cordially Mike
My earlier post got lost somewhere so here goes again:
 
Thanks for the help guys.
Unfortunately the carb top is to warped to sand flat.
It does seem to be a EE15. Once I figure out about putting up pictures I'll post some.
It will have to do until something better is found.
 
The threads in the manifolds are truly gone, so going for just an oversized nut doesn't look promising.
I emailed Brian Joseph's company last week about a set of refurbished manifolds, hoping to get a reply one of these days.
 
I'd prefer not to have the manifolds off the car during driving season, so if they do have to come off for shipping to Brian's that will have to wait for a couple of months.
 
Thanks for taking the time to reply,
Frank
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
