You can purchase a new 97 Stromberg carb from different antique auto part stores. Mac's in Grants Pass Oregon has new ones for $449.00. There are problems with using a 97 carb. The base is a three bolt base and ours is a four bolt base. I'm not sure, but I think you could probably switch bases. Using the 97 carb places the accelerator pump lever on the wrong side and also the choke. This is probably something you could live with but it would cost points in a judging. I'm not sure that the throttle can be connected to the shaft though the pictures I have seen make it look like there is enough shaft to do so.
 
Mac's has 97 carb repair kits which may allow you to salvage a carb. You probaly shouldn't use the 97 main jets which would come with this carb kit as I'm sure they are too small. I believe they are.047 and you should use something big like a .050 jet in a Cord.
While the new Stromberg company specializes in the 97, they did make a run of EX-2 carburetors (14 pairs, actually) for 1933 and 1934 Auburn V12 engines: http://www.stromberg-bulletin.com/aubur ... berg-ex-2/
 
When I asked about the possibility of newly manufacturing the AA-25, here is what the Stromberg represenative said:
 
Without being too indelicate, the cost of such an undertaking for such a short run (compared to buying a carburetor off the shelf) is eye-watering, though maybe not so, compared to the cost of many an award winning Cord restoration or the cost of finding and restoring super-rare carburetor models. 
So to answer your question, yes, we can do it, given the original pieces, time and budget.
 
He also said this about making the EX-2 for the Auburn V12 engines:
This was no light undertaking, achieved using the latest prototype technologies - digital scanning, new 3D CAD modelling then investment casting. We made around 28 pieces (14 pairs) for the Gilmore Museum - mostly the castings, but we did include a number of the small parts too.
 
I thought the Cord 810 /812 community would find this interesting. I don't know how many people would want AA-25 carburetors, but it seems that it would take a production run of more than just two or three dozens to make it worthwhile.
 
What is particularly nice, however, is that 3D printing combined with a good scanner and an original part to scan - all in the hands of one who knows how to use these things - could go a long way to re-manufacturing hard-to-find pieces if one could also cast them from the resulting 3D model. If we can keep young people in the old car hobby, 3D printing could be a real boon to their future projects.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
