Hot water to the intake manifold is used to heat up the fuel mixture during cold weather so the engine will run better. When the weather is warm it isn't needed and it's presents can cause the engine to vapor lock when it is shut down. Eliminating the water removes some of this heat. I live in California and don't have to worry about cold weather driving. That is why I blocked the water off. If you only drive your car during the warm time of the year you don't need to heat the intake manifold. I did drilled out my main carb. jets and feel it increased engine performance at all engine speeds.
 
As to no thermostats. Several of my Cord owner friends said they didn't use them so I took mine out a couple of years ago. My temperature usually is below 180 degrees and the highest has been about 190 degrees. I now have new heads which I purchased from Jim Higman, a ACD member, some years ago.
As with an Auburn, doesn't the thermostat serve a dual purpose as a flow restrictor (aka water circulating too fast does get proper air flow via radiator to cool properly) ?
 
That being said, I always drill a hole in the thermostat to allow for some circulation when thermostat is closed (eliminates air pockets and car "warms" up slower).
 
And, I run a 160 degree thermostat in everything (aka not a 180).
 
I agree to blocking off manifold (a bad idea in a Supercharged Auburn as well due to porous casings) - fuel does not need pre-heated anymore (it is much more combustible now than in 1936- 1937) and I doubt icing is too much a problem either.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
