If your talking about the outside handle that can be easy or tuff. First open the door you are working on. At the door jamb or the back of the doors there are 2 small holes about 3/8 inch diameter. Those are the holes you have to stick a flat blade screw driver in to depress the flat springs that holds the handle to the outside door skin. Hopefully you have the inside door panel off. Thats where I shine a light in the door so I can see the flat springs on the top and bottom of the handle body. Sorry but I do not recall how I removed my inner handles but I think they have a small pin holding them to the window and door linkage. Been a few years since I removed them. Bout 35 or 40 years. I work so ...
M
· Jan 19, 2016
Hi Jake,
 
It's Aris; I have sent you a Private message, did you receive it? Somehow it's still in my Outobx. Anyway, check the recent posts here, we might have a lead for the handles
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.