My understanding is that 6 cylinder heads are impossible to find however that may have changed in America.
I have seen patterns for casting a 6 cylinder head that an Auburn owner had in a town called Kilmore in Victoria, Australia but I can't remember the guy's name.
Another solution is to have a two piece "Sandwich Head" made which eliminates the need for core castings.
The attached picture shows such a head.
You would need the original head to begin with to measure up.

Thanks very much for the lead. And possible solution - much appreciated
Mr CellophaneSep 12, 2026 Thanks very much for the lead. And possible solution - much appreciated
I have tried calling Peter but no luck. One other possibility is to cut your old 6 cylinder head in half and have it measured up to make a new head in two pieces but CNC machined.
Back in the 1940s two piece heads were made in Australian for 810 Cords. These were cast in two pieces to eliminate core castings however today these heads could be CNC machined.
Once you had a program you could have more heads made for sale.
There must be other people out there needing them.


To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
