Do they have a 'W' on the head of the bolt ?
Very good question. If the W is imprinted in the bolt heads its wrong. The W needs to be a raised letter and not imprinted. Which really makes the reproduction much more difficult.. But doable just the same... 
 
Gary Parsons
 
The head bolts that were in my Cord engine with the original heads have B 2 , raised on the heads. I don't know if they are the original bolts or not.
The current judging standard I believe accepts plain headed bolts without any numbers or letters.
The bolts from Ed have plain tall heads.
Tom
The high capacity Cord cylinder heads require three different bolt lengths.  (4) 1 1/2" long, (14) 2 1/4", and (6) 2 1/2".  The (6) 2 1/2" bolts go in the blind holes (top row) and should be checked for length prior to torque to ensure they don't push through the water jacket.  Although it is always nice to have originally marked bolts, unmarked will not be knocked down in judging.  Modern bolts with grade markings will lose points.  The proper head bolts should have the extended heads.  Grade 5 will work, Grade 8 is overkill.
 
Hope that helps - Mike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
