I have a couple of sets of cast iron fog light brackets, driving light for sale. I have no use for them. Some samples of what I have. E- mail me @ gmduque323@gmail.com of text me 323-599-6220 Greg- Cosmo1950

Bill I have been "working" on the lost wax casting process to make these brackets. So far my furnace burner has not been capable of the heat needed to melt cast iron or carbon steel. But I'm very close and expect to have the ability to pour by the end of the year. Its a very detailed process and it takes considerable investment to create things no longer available at any cost. Also in the works are both types of inside door handles for the windows and door openers plus I am working on creating completely new Autolite GCO4804-A generators. When I state completely new I mean every part of the generator from the armature to the ends and the pulley. My design will not be the bushing and oil wick brush end bearing. Mine will have a seal ball bearing supporting that end. Finally I believe I can re create the original radiator and gas caps easily too.
Gary Parsons
Attached is a picture of a Fog Light with the correct long bracket.
To help keep the shape of the stainless steel conduit I introduced some galvanized wire.
The globe position inside the reflector is adjustable, however you have to dismantle the lamp to adjust the globe position .
The light pattern is changed dramatically by a small movement of the globe.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.





