I have several sets of H10 plugs. Do you want the two ring beer bottle? I also have the black base with red or black writing on them. I have some with cad colored base too. I can change the cad plated to black with gun bluing if needed. The beer bottle two ring plugs last sold for about $875.00 on ebay a few years ago. I have a few new ones of those and some used ones too.
 
 
Gary Parsons
I believe I have EVERY type of Champion H10 spark plug. Yesterday I was making up different "sets". I have 7 different set designs. Even have one H10 that has the Ford name imprinted on it. To the best of my research Champion made only two distint types of H10. A two ring many call beer bottle and the 5 ring in black or Cad body. I probably have 8 sets of the Cad body and may have 5 sets of the black body. But the beer body plugs I only have 4 sets. Some plugs are new too... But they are VERY EXPENSIVE... The last set I found on Ebay for new sold for nearly $900.00. But if you want best of show...That might be the only thing that seperates you from the rest.
 
 
Gary Parsons
Here lies the problem with judging, $900. spark plugs.
CORDiallyMike
Here lies the problem with judging, $900. spark plugs.
CORDiallyMike
 
Im in agreement with you Mike... But where does an owner draw the line. A NOS Cord dash light dimmer switch is nearly $300.00 but I purchased a modern replacement from a club member for $15.00... A set of CORRECT Fog lights with brackets is going to cost around $1200.00 to $1500.00.. And for that cost you recieve a single extra judging point. The Cord bumper jack is around $2500.00 and hard to find. No owner would EVER actually use one because it usually bends to bumper blade. The heaters are very expensive too.... Then a correct GCO4804-A generator is sure expensive plus nearly impossible to find.Figure low at $1500.00 and up to $3000.00 for one in very good condition. But we can use a Chrysler generator if we just want a driver too. The supercharged Stromberg AA25 carb is nearly $2500.00 too but one from a Caddalic fits and looks good too..But its not going to be judged very well. Each owner draws the line somewhere..For me I draw the line with the dual whitewall tires
 
 
Gary Parsons
John I actually have a NOS Champion H10 plug with the old Ford script on the porcylin body of it. For others wondering about the REQUIRED plugs for best high point judging here they are from my years of collectiing. Seen on the left is the late 50s or early 60s H10 with the Cad plated body. Next to it is the same plug but I used gun bluing to color it correctly. Then the next three are the plugs that most will use because they are original and not too hard to find. Then finally the much covetted Beer bottle H10 used for high points in Ford flathads and the 36 or 37 Cord engines. ALL OF THESE are NOS. They have never been in an engine. Look closely at the script on the white.See the red or black...No Idea why Champion did that. Then look at th emetal body. See the knurling is different too from early to late.Also the hex on the late plugs has a slightyl different look. the older plugs have a sharper hex. Chamion did make a H10 plug in canada with the MADE IN CANADA mark on it.These plugs have other small variations too but are the judging staff really going that deep to judge if all the plugs in your engine have the same color printing or the same hex design or the same knurling design??/ I for one hope not. I think I have 8 sets of the Cad plated plugs and probably 5 or 6 sets of the other H10 plugs but only maybe 3 sets of the new and used beer bottle H 10 plugs. If I were to sell ANY of the beer bottle plugs they will be expensive because they are so difficult to purchase.I wish I had purchased the last nos set I was bidding on ebay for that went for around $870.00 some 5 years ago. I have regrets....
Your welcome John. Later I will post some pics of the Ford Champion H10 and the great looking box's they came in. There is another H10 plug that many can run but not use for judging Its the H10C plug or the Autolite plug. sadly I forgot the number of the Autolite. I know Josh Malks ran the Autolite for the appearance. It looked close to the Beer bottle Champion.
 
 
Gary Parsons
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.











