New leather cups for the sift cylinder.
4 1/2 diameter. 100.00pr plus postage 248 557 3850
Please tell me how these differ from what Stan sells. Stan sells a rubber replacement cup.
to my knowledge' date=' Stan sells rubber O rings to substitute for the original leather.[/quote']
Page 56 of Stans catalog shows main shift cylinder neoprene piston cups which are a conversion from the original leather cups part number 6063 (E60227) sell for $207.50 per pair. Out here on the west coast I found and purchased a set of neoprene cups for around $25.00 each. Sad part was when I took the plunger with the cylinder and leather seal cups to this hydraulic parts shop they charged me a few dollars to measure the cylinder.. Even when I talked to them and told them what the diameter was. Second sad part was they did not tell me they would charge to measure the cylinder.But I did get my rubber seals. My leather seals are in very good shape for being maybe 80 plus years old.At best they may have been replaced in 1949 but I have no way of knowing this.I just know the car came off the road in 1949 from my historical information I posted about early ownership...
Will these also work for the Auburn Dual Ratio canister which is also 4 1/2 inch. Are they two cups back to back?
CORDially Mike
Yes... The Cord main vacuum cylinder has originally 2 leather cups back to back. They also have a flat steel spring that keeps the leather in contact with the cylinder. I will get some pics and post them here later.
I did not know the dual ratio had a similar vacuum cylinder on them. Good to know. thanks...
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
